SERVO COUPLINGS

Custom configure and download CAD drawings, download technical data (will require the latest version of Adobe Acrobat Reader) and view sizing information.

KM

KP

KP Series Bellows Coupling

Major Features:

• Bore Range: 3 - 75 mm
• Torque Range: 2 - 550 Nm
• Higher torsional stiffness and a shorter overall length.
• Tightening only one screw per hub locks the coupling free of backlash.
• Advantageous for space constrained or blind assembly installations.
• With EASY Clamp System for easy install and un-install.

KP Series - Custom Configure and Download 3-D Models
KP Series - 2-D CAD and PDF Drawings
KP Series Technical Data (144 KB .pdf file)

KLC Series Bellows Coupling

Major Features:

• Bore Range: 10 - 43 mm
• Torque Range: 25 - 125 Nm
• Bellows coupling with radial clamping hubs.
• Short overall length.
• Welded hub bellow connection.
  
• Same day delivery available.
  
• Low cost.

KLC Series - Custom Configure and Download 3-D Models
KLC Series - 2-D CAD and PDF Drawings
KLC Series Technical Data (136 KB .pdf file)

KG Series Bellows Coupling

Major Features:

• Bore Range: 6 - 90 mm
• Torque Range: 5 - 1300 Nm
• Bellows coupling with radial clamping hubs.
• With EASY Clamp System for easy install and un-install.
  
• Short overall length.
  
• Also available in stainless steel versions.

KG Series - Custom Configure and Download 3-D Models
KG Series - 2-D CAD and PDF Drawings
KG Series Technical Data (140 KB .pdf file)

KR Series Bellows Coupling

Major Features:

• Bore Range: 14 - 75 mm
• Torque Range: 25 - 540 Nm
• High torsional stiffness with low lateral spring rates for reduced bearing loads.
• Transmission of high torque values without compromising accuracy or smooth performance.
  
• Tightening only one screw per hub locks the coupling free of backlash.
  
• Advantageous for space constrained or blind assembly installations.
  
• With EASY Clamp System for easy install and un-install.

KR Series - Custom Configure and Download 3-D Models
KR Series - 2-D CAD and PDF Drawings
KR Series Technical Data (140 KB .pdf file)

KSD Series Bellows Coupling

Major Features:

• Bore Range: 15 - 97 mm
• Torque Range: 20 - 2500 Nm
• Maximum flexibility in the angular, axial and lateral
  directions.
  
• Self-centering conical bushings.
  
• High clamping forces.
  
• Zero backlash.
  
• Draw-off holes for easy hub removal.

KSD Series - Custom Configure and Download 3-D Models
KSD Series - 2-D CAD and PDF Drawings
KSD Series Technical Data (156 KB .pdf file)

KHS Series Bellows Coupling

Major Features:

• Bore Range: 6 - 60 mm
• Torque Range: 15 - 600 Nm
• High speed applications up to 25,000 rpm.
• Low moment of inertia and high torsional stiffness.
  
• Ideal for test stands, spindle drives and other high speed applications.
  
• Zero backlash.

KHS Series - Custom Configure and Download 3-D Models
KHS Series - 2-D CAD and PDF Drawings
KHS Series Technical Data (140 KB .pdf file)

KSS Series Bellows Coupling

Major Features:

• Bore Range: 15 - 70 mm
• Torque Range: 25 - 1500 Nm
• Transmission of high torque values without compromising accuracy or smooth performance.
• For use in corrosive or washdown environments.
  
• Self-centering conical hubs for keyless shaft-hub connections and high clamping forces.
  
• Very high torsion-resistant flexible metal bellow.

KSS Series - Custom Configure and Download 3-D Models
KSS Series - 2-D CAD and PDF Drawings
KSS Series Technical Data (156 KB .pdf file)

KGH Series Bellows Coupling

Major Features:

• Bore Range: 12 - 62 mm
• Torque Range: 40 - 700 Nm
• Bellows coupling with split hubs for easy mounting and dismounting.
• Custom length option.
  
• Short over all length.
  
• 2 corrugation or 4 corrugation bellows options.

KGH Series - Custom Configure and Download 3-D Models
KGH Series - 2-D CAD and PDF Drawings
KGH Series Technical Data (144 KB .pdf file)

KPP Series Pluggable Bellows Coupling

Major Features:

• Bore Range: 9 - 75 mm
• Torque Range: 20 - 550 Nm
• Bellows coupling with radial clamping hubs.
• Special plug-in design with EASY Clamp System for easy installation.
  
• Higher torsional stiffn ess and shorter overall length.
  
• Tightening only one screw per hub locks the coupling free of backlash.

KPP Series - Custom Configure and Download 3-D Models
KPP Series - 2-D CAD and PDF Drawings
KPP Series Technical Data (144 KB .pdf file)

KPS Series Bellows/Shaft Coupling

Major Features:

• Bore Range: 8 - 48 mm
• Torque Range: 2 - 550 Nm
• Bellows coupling with radial clamping hubs.
• Special plug-in design with EASY Clamp System for easy installation.
  
• Higher torsional stiffness and shorter overall length.
  
• Tightening only one screw per hub locks the coupling free of backlash.

KPS Series - Custom Configure and Download 3-D Models
KPS Series - 2-D CAD and PDF Drawings
KPS Series Technical Data (140 KB .pdf file)

WD Series Bellows Drive Shaft Coupling

Major Features:

• Bore Range: 9 - 85 mm
• Torque Range: 50 - 1600 Nm
• Bellows drive shaft coupling with split hubs.
• Customized lengths up to 20 feet.
  
• High speeds, very low inertia.
  
• Compensation of high radial loads for prevention of premature bearing failure.

WD Series - Custom Configure and Download 3-D Models
WD Series - 2-D CAD and PDF Drawings
WD Series Technical Data (160 KB .pdf file)

Elastomer Couplings

EKM Series Elastomer Coupling

Major Features:

• Bore Range: 6 - 70 mm
• Torque Range: 2 - 1000 Nm
• Easy-to-mount radial clamping hubs.
• Star-shaped elastomer element with involute tooth profile and high shore hardness ensures zero backlash over life of product.
  
• Electronically insulating and dampens oscillation resonance.
  
• Elastomer spider compensates for small shaft misalignments.
  
• Same day delivery available.

EKM Series - Custom Configure and Download 3-D Models
EKM Series - 2-D CAD and PDF Drawings
EKM Series Technical Data (460 KB .pdf file)

EKZ Series Elastomer/Drive Shaft Coupling

Major Features:

• Bore Range: 10 - 70 mm
• Torque Range: 20 - 700 Nm
• Special design makes “one person assembly” possible, even with an extremely long intermediate pipe.
• During maintenance, can be exchanged without disassembling the drive or output units.
  
• Elastomer spider compensates for small shaft misalignments.
  
• Electronically insulating and dampens oscillation resonance.
  
• The frictional shaft-hub connection is backlash free and ensures a safe torque transfer without keyways.

EKZ Series - Custom Configure and Download 3-D Models
EKZ Series - 2-D CAD and PDF Drawings
EKZ Series Technical Data (140 KB .pdf file)

ESM Series Elastomer Coupling

Major Features:

• Bore Range: 6 - 60 mm
• Torque Range: 10 - 1000 Nm
• High speed capability.
• Backlash free shaft couplings for small and medium torque values.
  
• Star-shaped elastomer element with involute tooth profile and high shore hardness ensures zero backlash over life of product.
  
• Elastomer spider compensates for small shaft misalignments.

ESM Series - Custom Configure and Download 3-D Models
ESM Series - 2-D CAD and PDF Drawings
ESM Series Technical Data (160 KB .pdf file)

EKS Series Elastomer/Shaft Coupling

Major Features:

• Bore Range: 10 - 48 mm
• Torque Range: 8 - 700 Nm
• Elastomer coupling with expanding shaft and radial
  clamping hub.
• For direct mounting in a hollow shaft.
  
• Star-shaped elastomer element with involute tooth profile and high shore hardness ensures zero backlash over life of product.
  
• Easy-to-mount radial clamping hub.

EKS Series - Custom Configure and Download 3-D Models
EKS Series - 2-D CAD and PDF Drawings
EKS Series Technical Data (156 KB .pdf file)