Edit

Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

Print Page Email Page
EPR-A Right Angle Planetary Gearbox

EPR-A-090-070G Right Angle Bevel Planetary Gearbox

Model: EPR-A-090-070G

Request Quote Quantity

Product Details

EPR Series right angle planetary gearboxes provide all the advantage of GAM's popular EPL inline planetary gearbox in a right angle configuration with many configurations and the best quality for the price point. The EPR-A-090-070G has a metric shaft output with dimensions that match other inline gear reducers on the market. All EPR servo gearboxes are supplied with a motor mount for your specific servo motor.

Configurable Attributes
Motor Mfg
Motor Part Number
Motor Shaft Diameter - mm (3.00 to 19.00)
Motor Shaft Length - mm (1.00 to 500.00)
Motor Pilot Diameter - mm (10.00 to 250.00)
Motor Pilot Height - mm (0.50 to 200.00)
Motor Bolt Circle - mm (1.00 to 350.00)
Motor Bolt Holes - mm (3.00 to 16.50)
Gearbox Series EPR
Gearbox Style A
Gearbox Size 090
Options G
Nominal Output Torque (Nm) 71.00
Max Acceleration Output Torque (Nm) 89.0
Emergency Output Torque (Nm) 216.0
Nominal Speed (RPM) 2,900
Max Input Speed (RPM) 6,000
Maximum Output Backlash (arcmin) 14
Allowable Radial Load (N) 2,400
Allowable Axial Load (N) 1,900
Torsional Stiffness (Nm/arcmin) 6.8
Weight (kg) 6.4
Noise Level (dB) <78
Mass Moment of Inertia (kg cm²) 4.9
Efficiency at Load 90%
Service Life >30000 Hours
Lubrication Mineral Grease EPO
Protection Rating IP 64
Operating Temperature Range -20°C to 90°C
D1 Max Available (mm) 19
D2 k6 (mm) 22.000
D3 h7 (mm) 68.000
D4 (mm) 80.000
D5 (mm) 90.000
F1 M8x16
F2 (8x)M6x12
L1 (mm) 244
L2 (mm) 46.0
L3 (mm) 30.00
L4 (mm) 35
L5 (mm) 9.0
L6 (mm) 6.000
L7 (mm) 24.500
L8 (mm) 156
L9 (mm) 198
L10 (mm) 90
Notice Overall length values are approximate and will vary depending upon the motor.
Notice Drawings and information contained herein are for reference only. Please contact GAM for application specific drawings.